挖掘机加长臂的配置是根据什么来划分的? - 常见问题

上海体彩网

您好!欢迎来访东营博诚长臂挖掘机出租公司!关于我们 | 联系我们 | 在线留言
全国统一服务热线
13793968666(来经理)
联系我们
联系人:王经理
联系电话:13793968666
地址:山东省东营市广饶县
常见问题

挖掘机加长臂的配置是根据什么来划分的?

日期:2020-05-05   来源:http://www.rbaras.com
挖掘机加长臂分为二段式、三段式、四段式,二段式主要适用于土砂、混凝土等建筑搬运、高速公路坡面修整及河道疏通清淤及建筑基础、河道、深沟等土石方挖掘作业等;三段式、四段式主要适用于高层建筑楼体的拆解等作业等。更主要的是:要根据加长臂重量的需要,适当加重后屁股配重块的配重重量,以保持前后平衡。避免挖掘机工作中出现事故。
The extension arm of excavator is divided into two-stage, three-stage and four-stage types, which are mainly applicable to the handling of buildings such as soil and sand, concrete, etc., the trimming of highway slope, dredging and dredging of river channel, excavation of building foundation, river channel and deep ditch, etc.; three-stage and four-stage types are mainly applicable to the dismantling of high-rise buildings, etc. The most important thing is: according to the needs of the weight of the extended arm, the weight of the rear butt counterweight should be increased appropriately to maintain the front and back balance. Avoid accidents in excavator operation.
挖掘机加长臂、加长大小臂主要配套机重及配置为:
The main supporting machine weight and configuration of the extension arm and the extension arm of the excavator are as follows:
1、10-16吨位加长臂,可加长到13米,
1. The 10-16 tonnage extension arm can be extended to 13 meters,
长臂挖掘机租赁
2、20-22吨位加长臂,可加长到15.4米,
2. The 20-22 tonnage extension arm can be extended to 15.4m,
3、20-25吨位加长臂,可加长到18米
3. 20-25 tonnage extension arm, can be extended to 18 meters
4、25-34吨位加长臂,可加长到20米
4. 25-34 tonnage extension arm, can be extended to 20 meters
5、35-40吨位加长臂,可加长到22米
5. 35-40 tonnage extension arm, can be extended to 22 meters
6、40-50吨位加长臂,可加长到24-26米
6. 40-50 tonnage extension arm, can be extended to 24-26 meters
7、以上加长臂统一配置为:0.4方挖斗1个、铲斗油缸1支、销轴6支、 高压软管4条、黄油管3条、连杆总成一套。不管哪种车床顶尖,都需要莫氏锥度的配合,利用的是摩擦的原理,拔出来是利用顶丝顶出来的,利用的是杠杆原理。
7. The above lengthening arms are uniformly configured as: one 0.4 square bucket, one bucket cylinder, six pin shafts, four high-pressure hoses, three grease pipes and one set of connecting rod assembly. No matter what kind of lathe center, it needs the coordination of Morse taper. It uses the principle of friction. It uses the principle of jackscrew to pull it out and leverage to pull it out.
关于长臂挖掘机租赁http://www.rbaras.com就先介绍到这里了,相信大家在实际的工作中会用到相关知识,如果您有这方面的需要,欢迎前来选购。
About the long arm excavator rental http://www.bodying.com, I'm sure you will use relevant knowledge in the actual work. If you have this need, welcome to purchase.
  • 13793968666
  • 返回顶部

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】

海南七星彩 海南福彩中心 北京福彩网 99彩票导航网 吉林快三 浙江福彩网 上海11选5走势 浙江体彩网 北京福彩网 全球彩票开户