The distributor of excavator's elongated arm reminds us that we must pay attention to the maintenance of spare parts, which can greatly increase the utilization rate of supporting facilities. The excavator bucket is an important supporting facility of elongated arm. Because of the frequent selection, wear and tear will be avoided. But how to avoid the wear and tear of the elongated arm of the excavator?
First of all, after using the extended arm for excavation, we must adhere to the gelatin type and nursing of the bucket for the first time. Because this type of part must be so many places and materials to adhere to isolation, it is very easy to be damaged by some water-rich or corrosive materials, and some very special parts of the bucket blade are easier to wear and tear, so remember to adhere to correction every day. At the same time, we should adhere to the gel type and maintenance on time.
At the same time, we should choose different types of battles according to different selection objectives. This type of supporting facilities has different weight and types. Different raw materials and different development techniques are used. The needles are directed at different inventive goals. Among them, the battles that small sand grains and solid granite can use are totally different. According to different energy sources, different bucket diggers are used.
In order to avoid serious wear and tear of the excavator, we must be in place in our daily maintenance work.
Some people say that their excavators work slowly after a period of time, why? Excavator lengthening arm manufacturer to introduce us to the excavator when the whole car / car action is slow what we need to check? Many friends don't know how to check the excavator when it's working slowly. The blankness on their faces can't help us solve the problem. Is it because of reinforcement or hydraulic problems?
Whether the excavator is maintained on time, whether the hydraulic oil is not replaced on time, whether the hydraulic oil circuit is blocked, please check the system pressure at idle speed, check whether the oil return filter element is blocked. If the output power of the engine is too low and the power is insufficient, please analyze the output of the engine with DX data. Whether all the cylinders can work at the same time, check whether there is black smoke in the engine, and if the nozzle wears seriously, the power of the engine will also decrease. Hydraulic pump output is insufficient, enter the service diagnosis system to test the relevant pressure. Insufficient pilot pressure causes insufficient opening spool pressure, insufficient flow and slow action. Circuit related problems: excavator CPU, high and low pressure sensors, solenoid valves and line faults.
If the excavator moves slowly, we have to learn to find out the reasons. After reading the above, we have a certain understanding of how to check it. Want to know more can also contact our staff oh!